Devices to Improve the Performance of a Conventional Two-stroke Spark Ignition Engine

Devices to Improve the Performance of a Conventional Two-stroke Spark Ignition Engine
Author :
Publisher :
Total Pages : 19
Release :
ISBN-10 : OCLC:68392668
ISBN-13 :
Rating : 4/5 ( Downloads)

Book Synopsis Devices to Improve the Performance of a Conventional Two-stroke Spark Ignition Engine by :

Download or read book Devices to Improve the Performance of a Conventional Two-stroke Spark Ignition Engine written by and published by . This book was released on 1995 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents research efforts made in three different phases with the objective of improving the fuel economy of and reducing exhaust emissions from conventional, carbureted, two-stroke spark ignition (SI) engines, which are widely employed in two-wheel transportation in India. A review concerning the existing two-stroke engine technology for this application is included. In the first phase, a new scavenging system was developed and tested to reduce the loss of fresh charge through the exhaust port. In die second phase, the following measures were carried out to improve the combustion process: (1) using an in-cylinder catalyst, such as copper, chromium, and nickel, in the form of coating; (2) providing moderate thermal insulation in the combustion chamber, either by depositing thin ceramic material or by metal inserts; (3) developing a high-energy ignition system; and (4) employing high-octane fuel, such as methanol, ethanol, eucalyptus oil, and orange oil, as a blending agent with gasoline. Based on the effectiveness of the above measures, an optimized design was developed in the final phase to achieve improved performance. Test results indicate that with an optimized two-stroke SI engine, the maximum percentage improvement in brake thermal efficiency is about 31%, together with a reduction of 3400 ppm in hydrocarbons (HC) and 3% by volume of carbon monoxide (CO) emissions over the normal engine (at 3 kW, 3000 rpm). Higher cylinder peak pressures (3-5 bar), lower ignition delay (2-4°CA)° and shorter combustion duration (4-10 °CA) are obtained. The knock-limited power output is also enhanced by 12.7% at a high compression ratio (CR) of 9:1. The proposed modifications in the optimized design are simple, low-cost and easy to adopt for both production and existing engines.


Devices to Improve the Performance of a Conventional Two-stroke Spark Ignition Engine Related Books