X-band Antenna for CubeSat Satellite
Author | : Joana Maria Llull Coll |
Publisher | : |
Total Pages | : |
Release | : 2017 |
ISBN-10 | : OCLC:1120465854 |
ISBN-13 | : |
Rating | : 4/5 ( Downloads) |
Download or read book X-band Antenna for CubeSat Satellite written by Joana Maria Llull Coll and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This project describes the process of design and manufacturing of an X-Band (7.1-8.5 GHz) antenna for a CubeSat satellite, facing many of the design criteria and challenges of pico-satellites. A CubeSat is a type of miniaturized satellite for space research that is made up of multiples of 10×10×10 cm cubic units and has a mass of no more than 1.33 kilograms per unit. It can be manufactured using commercial off-the-shelf (COTS) components for its electronics and structure. Limited size, low mass, circular polarization, high gain and wide bandwidth are the main challenges of the antenna design. A design of an aperture-coupled patch antenna has been performed to overcome the difficulties and fulfill all the requirements for CubeSats antennas. The antenna consists of one or two rectangular patches, fed by a microstrip line through a crossed slot in the ground plane. The two patches are separated from the ground plane using a layer of hard, low-permittivity foam. After the study of several antenna models, a stacked patch antenna (two patches) accomplished most of the requirements. The antenna models have been simulated using a 3-D electromagnetic simulation software, HFSS. Simulation and measured results show a gain within 6-10dB, very good circular polarization, a good matching in the whole frequency band and accomplish dimension criterias for CubeSat antennas.