Download or read book Effect of Irradiation at 588 K on Mechanical Properties and Deformation Behavior of Zirconium Alloy Strip written by J. Baicry and published by . This book was released on 1987 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Irradiation tests conducted for the Advanced Fuel Assembly (AFA) grid development allowed the measurement of the mechanical characteristics, growth, and relaxation of the following materials: stress-relieved, ?-annealed, and ?-quenched Zircaloy-4, and ?-annealed Zr-3Sn-1Mo. The mechanical characteristics of the zirconium alloys approached a limit value as early as 5 x 1024 n m-2, except for the ?-quenched Zircaloy-4 for which the limit value was reached later at about 5 x 1025 n m-2. Uniform elongation at 588 K showed a minimum at about 5 x 1024 n m-2; beyond this fluence, stress-relieved Zircaloy-4 presented the most marked tendency to increase. Longitudinal direction growth of annealed Zircaloy-4 and longitudinal and transverse direction growth of stress-relieved Zircaloy-4 may be expressed by the formula ? = A(?t)n where n = 0.67 (stress-relieved Zircaloy-4) and n = 0.4 (annealed Zircaloy-4). It is doubtful that the growth is associated with a density change. The stress-relaxation of the zirconium base materials is nearly complete for 4 x 1025 n m-2, with the exception of Zr-1Nb which has an intermediate behavior between those of Zircaloy-4 and Inconel 718.